VLP is a vinyl repair product that comes in a tube with a applicator nozzle.
MATERIALS: Bonds vinyl, vinyl coated foam articles.
CAUTIONS: Extremely flammable. Vapors harmful. Harmful or fatal if swallowed. Avoid prolonged breathing of vapors. Use in well ventilated area. Keep away from heat sources, open flame and sparks. VLP can discolor or remove colorant from vinyl.
COMPOSITION: Contains tetrahydrofuran, methyl ethyl ketone, cyclohexanone.
FIRST AID: If swallowed, do not induce vomiting. Contact physician immediately. If eye or skin contact occurs, flush/wash thoroughly with water. Avoid overexposure to vapors. If one experiences eye watering, headaches, or dizziness, move immediately to fresh air. Ventilate area, if symptoms persist, consult physician.
USE: Surface must be clean and dry; for best results, use in temperatures above 50 degrees Fahrenheit. Small tears and splits require a 1/2 inch wide bead of VLP; allow 30 minutes to dry and repeat; allow 4 hours dry time for maximum strength. Long tears and splits require the vinyl to be pulled together and stitched with masking tape every 1-2 inches; apply 1/2 inch wide bead of VLP to untaped areas and allow a minimum of 30 minutes to dry; carefully remove masking tape and apply a 1/2 inch wide bead to entire repair; allow 4 hours dry time before use; or 30 minutes and repeat; then allow 4 hours dry time for maximum strength. For small holes, apply a few drops of VLP and allow one hour to dry before use.
For large holes, use Vyna Bond, below. To conceal repair, apply a small amount of VLP to a lint free cloth and dab lightly onto dried VLP repair until gloss is removed.