Vyna Bond is a vinyl repair product that comes in a tube with applicator nozzle. It supposedly can repair and bond under water. Bonds to all vinyls without heat and a patch is included for repairs.

MATERIALS: Bonds vinyl.

CAUTIONS: Use with adequate ventilation and avoid prolonged breathing of harmful vapors. Flammable, keep away from heat sources, open flame, and sparks. Harmful or fatal if swallowed. Avoid eye and skin contact.

COMPOSITION: Contains methyl ethyl ketone and dimethylformamide.

FIRST AID: If swallowed, do not induce vomiting. Contact physician immediately. If eye or skin contact occurs, flush/wash thoroughly with water. Avoid overexposure to vapors. If you experience eye watering, headaches, or dizziness, move immediately to fresh air. Ventilate area. If symptoms persist, consult physician.

USE: Surface must be clean. Cut patch material to size; round patch corners. For best results, use in temperatures above 50 degrees Fahrenheit.

For inflatables and light gauge vinyl, apply Vyna Bond sparingly to patch and press firmly into place; allow 2 to 4 hours dry time for normal use; allow 8 hours dry time for maximum strength. For heavy gauge vinyls, apply Vyna Bond liberally to patch and press firmly, squeezing all air bubbles out of repair area; allow 8 hours dry time for maximum strength. For underwater repairs, apply Vyna Bond liberally to patch; fold patch in half and unfold under water; immediately press firmly on repair area squeezing out all water and air bubbles. For large pool liner tears, cut off a piece from your pool liner or get a scrap piece from your pool dealer. For waterbed repairs apply Vyna Bond liberally to patch and press firmly, squeezing all air bubbles out of repair area; allow 8 hours dry time for maximum strength.